Our facility is sufficiently large to have areas dedicated to the production of specific products such as counter tops and large custom surfaces, cabinetry, custom furniture and painting and lacquering.

Our 4000 ft³ spray and lacquer room (shown right) is outfitted with a Kremlin air assisted/airless spray equipment. The room has explosion-proof lighting, 4000 cfm. air replacement, dual floor/ceiling exhaust fans and grip is enhanced with a grated floor which allows excess paint to be kept out from under footwear.

In addition to our modern machinery, we have at considerable expense, installed sophisticated dust extraction equipment. Every possible precaution is taken to minimize the quantity of dust particles entering the air in our workshop area. This reduction in airborne dust has a two-fold benefit upon our work environment: it reduces the fire risks associated with small particles of flammable material and it creates a comfortable work atmosphere containing a minimum of airborne dust particles.

This dust reduction system is composed of continuously running overhead dust filters, vacuum hoses attached to all dust generating equipment where possible and moveable vacuum hoses for use with machinery where it is either not possible or not practical to attach hoses permanently. All filters are checked and cleaned as part of the daily clean-up schedule. All filters are replaced according to a fixed schedule unless excessive fouling is experienced. In this case they are replaced immediately and monitored more closely until conditions return to normal.